 We
stock Aquarius pipe flashings for profiled or corrugated
roofing and cladding.
Aquarius
pipe flashings provide a durable, flexible weatherproof
seal, where chimneys, flues, ducting, pipework and electrical
services pass through roof sheeting and cladding.
Each
flashing suits a wide range of pipe sizes and the sleeve
has pipe diameters marked on each rib as an aid to correct
fitting. The flexible base is easily formed to match the
sheet profile and installation is made simple, using our
purpose designed fixing kits.
- Flexible
base - easily formed to match sheet profile
- EPDM
or Silicone rubber - to suit cold or hot pipes
- Square
base - facilitates easy installation
- Adaptability
- suits either standard or retrofit applications
- Simple
to fit - sleeve marked with pipe diameters
Pipe diameters (mm) |
Base dimensions (mm) |
Product code |
RFC
clips |
0
- 25° roof pitch |
0
- 45° roof pitch |
EPDM
- black temp range -40 to 115°C |
Silicone
- red temp range -60 to 240°C |
10 - 90 |
10 - 70 |
155 x 155 |
ADC - 2 |
ADH - 2 |
5 |
40 - 100 |
40 - 90 |
203 x 203 |
ADC - 3 |
ADH - 3 |
5 |
75 - 150 |
75 - 135 |
254 x 254 |
ADC - 4 |
ADH - 4 |
6 |
125 - 200 |
125 - 180 |
305 x 305 |
ADC - 5 |
ADH - 5 |
6 |
145 - 250 |
145 - 230 |
356 x 356 |
ADC - 6 |
ADH - 6 |
7 |
195 - 300 |
195 - 250 |
432 x 432 |
ADC - 7 |
ADH - 7 |
7 |
230 - 380 |
230 - 355 |
540 x 597 |
ADC - 8 |
ADH - 8 |
9 |
315 - 500 |
315 - 450 |
650 x 720 |
ADC - 9 |
ADH - 9 |
11 |
400
- 750
0 - 6° pitch
400
- 630
0 - 25° pitch |
400 - 500 |
965 x 995 |
ADC - 10 |
ADH - 10 |
15 |
Aquarius Aquadapt for retrofit applications
All Aquadapt flashings can be used for retrofit applications. |
|
|
|
| They are simply cut open down the seam, wrapped
around the pipe, and crimped together using the retrofit
clips. |
The column to the left shows how many RFC clips
each flashing requires for retrofit applications. |
Use the required number of clips as listed and
space evenly prior to crimping. |
|
- Neat
finish - small base and low profile sleeve
- Flexible
base - easily formed to match sheet profile
- High
quality, durable materials - resistant to ozone and UV
- EPDM
or Silicone rubber - to suit cold or hot pipes
Pipe diameters (mm) |
Base
dimensions (mm) |
Product
code |
0
- 25° roof pitch |
0
- 45° roof pitch |
EPDM
- black temperature range -40 to 115°C |
Silicone
- red temperature range -60 to 240°C |
3 - 25 |
3 -20 |
75 x 75 |
MSC - 1 |
MSH - 1 |
5 - 50 |
5 - 45 |
115 x 115 |
MSC - 2 |
MSH - 2 |
45 - 90 |
45 - 80 |
155 x 155 |
MSC - 3 |
MSH - 3 |
To
order: use the chart above ensuring the pipe diameter
falls comfortably within the dimensions shown.
Select either EPDM (cold pipes) or Silicone (hot pipes) and use the relevant
product code. |
 Ethylene
Propylene Diene Monomer (EPDM) Rubber.
Temperature range: -40°C to +115°C. Resistant to
ozone and Ultra Violet light.
Silicone
Rubber.
Temperature range: -60°C to +240°C. resistant to
ozone and Ultra Violet light.
Aluminium
support ring: Grade A1200-0 1mm thick.
The
manufacturers state that all Aquarius Rubber flashing products
have a 20-year product replacement warranty against faulty
manufacture or materials.
Aquarius
Pipe flashings - for slate and tiled roofs.
Felt
Roofseal Pipe Flashings - for bituminous felt roofing. |
