Fibre Cement

Range of self drilling fasteners for fixing fibre cement sheets to steel rails, allowing fixing away from the edge of sheet.

Fasteners incorporate wings which ream an oversized hole in sheets allowing for movement as recommended by sheet manufacturers.

Fasteners are 14g (6.3mm) diameter, with a minimum 8 micron Zinc coating. All fasteners come complete with an EPDM Baz washer, and are all 5/16" standard hexagon washer headed.

Code Length Point Max Build Up Drilling Capacity TFC110B 110mm 3pt 80mm Upto 4mm Steel TFC130B 130mm 3pt 100mm Upto 4mm Steel TFC150B 150mm 3pt 120mm Upto 4mm Steel TFC175B 175mm 3pt 145mm Upto 4mm Steel TFC190B 190mm 3pt 160mm Upto 4mm Steel TFC230B 230mm 3pt 200mm Upto 4mm Steel           TFCH125B 125mm 5pt 85mm Upto 12.5mm Steel TFCH150B 150mm 5pt 110mm Upto 12.5mm Steel TFCH190B 190mm 5pt 150mm Upto 12.5mm Steel

Stitching Sheets, Flashings & Rooflights   TLOCK38 38mm long grommet fastener c/w clear sela washer and cap. Predrill 10mm hole (13mm if PVC rooflight)   Mastics 8mm round butyl bead in 6m rolls for side laps 10mm x 4mm white EPDM in 10m rolls for sealing rooflights

Technical Information

Tensile Strength 3850lbs 17.2kN Shear Strength 2768lbs 12.4kN Torsional Strength 150 Inch lbs   Pullout Results 3pt Fasteners 2mm Steel 950lbs 4.24kN 2.5mm Steel 1250lbs 5.58kN 3mm Steel 1725lbs 7.67kN 3.5mm Steel 2240lbs 9.95kN 4mm Steel 2610lbs 11.60kN 5mm Steel 2900lbs 12.89kN Please Note: All figures are average test results and are ultimate failure loads, No safety factor is taken into account

Fibre Cement Common Profiles

Profile 6 also known as P6, B6, Standard 6 and Big 6

Monad

Trafford Tile also known as Canada Tile

Double 6

Double 6 Metric also known as Double 6M

Eternit 2000 Deep Profile also known as Atlas Major Tile

Cape Fort